Heating Honeywell Home Zone Valves | 3/4″ Sweat Zone Valve (Connection = 18″ Leads)

The V8043E1012 Sweat Connection Zone Valve Is Part Of The Honeywell 1000 Series, Which Is Preferred Among Installers Due To Its Ability To Fit Virtually Every System, Eliminating The Need To Stock A Variety Of Valves. It Features A Long-Life Synchronous Motor For Smooth, Quiet Operation Plus A Convenient Auxiliary End Switch For Switching Between Boiler, Circulator Pump And Other Devices With A Single Zone Valve.

Features:

• May Be Installed Without Disassembling The Valve;
• Manual Opener (On All Models, Except Straight-Through, Normally Open Valves) For Valve Operation On Power Failure; Valve Returns To Automatic Position When Power Is Restored;
• Complete Powerhead May Be Removed Or Replaced Without Breaking Plumbing Line Connections Or Draining The System;
• Compact Construction For Easy Installation;
• Approvals Of Underwriters Laboratories Inc (Ul Component Listed: File Mh11826 Vol. 1)
• Actuator Motor May Be Replaced Without Removing The Valve Body Or Draining The System

• Hydronic Control. Use This Valve In Closed Loop Hydronic Systems That Do Not Contain Dissolved Oxygen In System Water, Such As Fresh Water From Frequent Source Of Makeup Water.
• Valve Designed For Cycling (Not Constantly Powered On) Applications

• Pipe Size (Dn): Dn20
• Fluid Temperature Range: 50 F To 200 F
• Electrical Connections: 18″ Leads
• Power Consumption: 7.7 Va
• Nominal Timing: 15 Sec
• Valve Action: Spring Return To Close
• Dimensions: 4″ High X 3-1/2″ Wide X 2-3/8″ Deep
• Auxiliary End Switch: Spst
• End Switch Rating: 50 Va Pilot Duty @ 24 V
• Static Pressure (Psi): 125 Psi
• Materials (Body): Brass
• Materials (Stem): Stainless Steel
• Materials (Ball Plug): Buna-N (Nbr) Rubber Ball
• Materials (Packing O-Rings): Epdm O-Rings
• Voltage: 24V
• Manual Opener: Yes
• Tradeline Value: Tradeline