Heating Field Controls Field Controls Venting | 10″ Draft Regulator For Oil, Gas, Wood, And Coal

Solid, Oil Or Gas Commercial/Industrialthis Is A Series Of Compact, Rugged, Heavy-Duty Controls For Use Onlarge Residential, Commercial, And Industrial Applications. The Field Type M+Mg2 Draft Control Provides Precise Draft Regulations For Solid Fuels, Oil, Gas, Or Oil/Gas Appliances Requiring Only The Simplest, On-The-Job Adjustments Depending On Which Fuel Is To Be Utilized. In A Gas Installation, The Double-Acting Type M+Mg2 Is Specified Instead Of A Draft Hood To Give The Appliance The Assistance Of The Chimney. In A Duel Fuel Oil/Gas Or A Gas-Fired Only Application, Use The M+Mg2 As A Double-Acting Draft Control With The Optional Field Thermal Switch Accessory. Use The M+Mg2 As A Single-Acting Draft Control For Oil Or Solid Fuel Applications. For Any Installation With 10″ Or Larger Diameter Vent Pipe, Specify Our Standard M+Mg2 Draft Control, The Unit That Can Be Adapted To Any Fuel. The Moving Part (Gate) Rests On A Long, Thin, Stainless Steel Knife Edge Which, In Turn, Is Supported By Self-Aligning And Self-Cleaning Bearings. When The Heavy Gauge Gate Moves, Only The Knife Edge Rests On The Bearing For Minimum Friction And Maximum Sensitivity To Draft Changes.

Features

• Control Size: 10
• Nominal Capacity Per Sq. Inch: 78.5
• Diameter: 9-10
• Circumference: 28-1/4 To 31-1/2