Heating Resideo Honeywell Gas Valves | Standard Dual Direct Ignition Gas Valve

Product Overview:

• Combination Gas Controls For Use With Hot Surface/Direct Spark Systems In 24 Vac, Gas-Fired Appliances With Capacities From 20 To 200 Cfh

• Controls Include Manual Valve, Two Automatic Operators, And Pressure Regulator
  
• Provide Two Automatic Valves
  
• Solenoid Operated First Automatic Valve Opens On Thermostat Call For Heat; Closes When Call For Heat Ends
  
• Diaphragm Operated Second Automatic Valve Opens Under Control Of The Regulator; Closes If Gas Or Power Supply Is Interrupted
  
• Meets Codes Requiring Dual Safety Shutoff
  
• Natural To Lp And Lp To Natural Conversion Kits Available For Standard And Slow Opening Gas Valves
  
• Adjustments And Wiring Connections Are Accessible From Top Of The Control
  
• On-Off Lighting Sequence

• Description: 24 Vac Dual Direct Ignition Gas Valve With 1/2 In. X 1/2 In. Inlet/Outlet, Standard Opening And 3.5 In. Wc Pressure Regulator Setting
  
• Type: Single Stage
  
• Ignition Type: Direct Ignition
  
• Type Of Gas: Natural
  
• Inlet/Outlet Size (In.): 1/2 In. X 1/2 In.
  
• Body Pattern: Straight-Through
  
• Opening Characteristics: Standard
  
• Capacity @ 1 In. P.D.: 150,000 Btu/Hr; 20,000 Btu/Hr Minimum
  
• Pressure Ratings (Psi): 1/2 Psi
  
• Pressure Ratings (Kpa): 3.5 Kpa
  
• Pressure Regulator Setting (Psi): 3.5 In. Wc
  
• Pressure Regulator Setting (Kpa): 0.87 Kpa
  
• Pressure Tapping: 1/8 In. Npt With Plug
  
• Electrical Connections: 1/4 In. Quick-Connect Male Terminals
  
• Electrical Ratings: 24 Vac
  
• Frequency: 60 Hz
  
• Anticipator Setting: 0.5 A
  
• Temperature Range (F): 0 F To 175 F
  
• Temperature Range (C): -18 C To +79 C
  
• Mounting: 0 To 90 Degrees In Any Direction From The Upright Position Of The Gas Control Knob, Including Vertically
  
• Dimensions (In.): 4 15/16 In. High X 4 1/8 In. Wide X 2 11/16 In. Deep
  
• Dimensions (Mm): 125 Mm High X 104 Mm Wide X 69 Mm Deep
  
• Includes: Natural To Lp Conversion Kit, One 1/2″ X 3/8″ Reducer Bushing, One 3/4″ Straight Flange
  
• Approvals, American Gas Association Ias: Aga Design Certified: File No. L2025006
  
• Approvals, Canadian Gas Association: Cga Design Certified: File No. L2025006
  
• Approvals, Underwriters Laboratories Inc:Ul Component Recognized