Heating Resideo Honeywell Gas Valves | Step Opening Dual Standing Pilot Gas Valve – 3/4″ X 3/4″

24 Vac Dual Standing Pilot Gas Valve With 3/4 In. X 3/4 In. InletOutlet, Step Opening And Full Rate: 3.5 In. Wc; Step Setting: 0.9 In. Wc Pressure Regulator Setting

Features

• Combination Gas Control For Use In 24 Vac, Gas-Fired, Standing Pilot Appliances With Capacities From 30 To 300 Cfh.


• Controls Include Manual Valve, Two Automatic Operators, Servo Pressure Regulator And Pilot Adjustment.


• Compact Size.


• Provide Two Automatic Valves.


• Solenoid-Operated First Automatic Valve Opens On Thermostat Call For Heat; Closes When Call For Heat Ends.


• Diaphragm-Operated Second Automatic Valve Opens Under Control Of Regulator; Closes If Gas Or Power Supply Is Interrupted.


• Meet Codes Requiring Dual Safety Shutoff.


• Natural To Lp And Lp To Natural Conversion Kits Available For Standard And Slow Opening Gas Valves.


• Lite-Rite (Off-Pilot-On) Lighting Sequence.


• All Adjustments, Wiring Connections And Pilot Outlet Are Accessible From Top Of Control.


• Adjustable Servo Regulator Effectively Maintains Almost Constant Gas Output Pressure Under Wide Fluctuations In Gas Supply Pressure.


• Compatible With Eco Connector.

Type: Single Stage
Ignition Type: Standing Pilot
Type Of Gas: Natural
Inlet/Outlet Size (In.): 3/4 In. X 3/4 In.
Body Pattern: Straight Through With Integral Tapping; With Flange
Opening Characteristics (Standard, Step): Step Opening
Capacity @ 1 In. P.D.: 200,000 Btu/Hr; 30,000 Btu/Hr Minimum
Pressure Ratings: ½ Psi, Or 3.5 Kpa
Pressure Regulator Setting(Psi): Full Rate: 3.5 In. Wc; Step Setting: 0.9 In. Wc
Pressure Regulator Setting(Kpa): Full Rate: 0.87 Kpa; Step Setting: 0.22 Kpa
Pilot Gas Outlet: Compression Fitting For 1/4 In. Od Tubing
Pressure Tapping: 1/8 In. Npt With Plug
Electrical Connections: 1/4 In. Quick-Connect Male Terminals
Electrical Ratings: 24 Vac
Frequency: 60 Hz
Anticipator Setting: 0.7 A
Temperature Range: 0° To 175°F, Or -18° To +79°C
Mounting: 0 To 90 Degrees In Any Direction From The Upright Position Of The Gas Control Knob, Including Vertically
Dimensions (In.): 5 3/8 In. High X 4 1/16 In. Wide X 2 11/16 In. Deep
Dimensions (Mm): 135 Mm High X 104 Mm Wide X 69 Mm Deep
Includes: Two 3/4 X 1/2 In. Reducer Bushings
Approvals, American Gas Association Ias: Aga Design Certified: File No. L2025006.
Approvals, Canadian Gas Association: Cga Design Certified: File No. L2025006.