Heating Resideo Ignition Controls & Modules | 3/4″ Npt Intermittent Hot Surface Pilot Ignition Smartvalve

3/4″ Npt X 3/4″ Npt Intermittent Hot Surface Pilot Ignition Smartvalve Control With Standard Opening And 3.5″ Wc Pressure Regulator Setting

Includes: (2) 3/4″ X 1/2″ Reducer Bushings And An Lp Conversion Kit.

Features

• These Controls Communicate Directly With An Electronic Fan Timer (St9160 Electronic Fan Timer For Single Stage Applications; St9162 Electronic Fan Timer For Two-Stage Applications) In Typical Forced Warm Air Furnace Applications.


• They Also Interface With The 208907 Terminal Board, Providing Compatibility With Power Stealing Thermostats. Or, They Directly Interface With The Appropriate Power Supplies And A System Thermostat For Additional Appliance Applications.


• When Controlled Directly By A Thermostat, These Controls Do Not Provide A Postpurge Function, Because Power To The Control Is Removed When The Thermostat Call For Heat Ends.


• The Sv9541 And Sv9641 Systems Are Suitable For A Wide Range Of Fan-Assisted Combustion Gas-Fired Appliances Including Furnaces, Rooftop Furnaces, Boilers, Unit Heaters, Infrared Heaters, Water Heaters And Commercial Cooking Appliances.

• Flame Sense: Two Rod


• Type Of Gas: Natural


• Ignition System Type: Intermittent Hot Surface Pilot Ignition


• Ignition Sequence: Intermittent Pilot


• Ignition Source: Pilot


• Ignition Trials To Lockout: Continuous Retry


• Prepurge: 15 Seconds


• Body Pattern: Straight-Through


• Opening Characteristics (Standard, Step): Standard Opening


• Control Voltage (Thermostat Or Other Call For Heat): 24 Vac


• Ignition Trial Time (Sec): 90 Sec


• Electrical Ratings: 24 Vac


• Frequency: 60 Hz


• Frequency: 50 Hz


• Flame Failure Response Time (Sec): 1.6 Sec @ 3 Μa


• Ambient Temperature Range (F): -40 F To +175 F


• Ambient Temperature Range (C): -40 C To +79 C


• Dimensions (In.): 3.2 In. Wide X 4.9 In. High X 4.1 In. Long


• Dimensions (Mm): 81 Mm Wide X 124 Mm High X 104 Mm Long


• Pressure Regulator Setting (Psi): 3.5 In. Wc


• Pressure Regulator Setting (Kpa): 0.87 Kpa


• Pressure Ratings (Psi): 1/2 Psi


• Pressure Ratings (Kpa): 3.5 Kpa


• Inlet/Outlet Size (In.): 3/4 In. Npt X 3/4 In. Npt.


• Maximum Capacity (Ft³/Hr): 415 Ft³/Hr


• Maximum Capacity (M³/Hr): 11.8 M³/Hr


• Minimum Capacity (Ft³/Hr): 30 Ft³/Hr


• Minimum Capacity (M³/Hr): 0.8 M³/Hr


• Maximum Capacity At 1 In. P.D. (Ft³/Hr): 300 Ft³/Hr


• Maximum Capacity At 1 In. P.D. (M³/Hr): 8.5 M³/Hr


• Pressure Tapping: 1/8 In. – Npt


• Mounting: 0 To 90 Degrees In Any Direction From The Upright Position Of The Gas Control Knob, Including Vertically.


• Pilot Gas Outlet: Yes


• Tradeline Value: Super Tradeline