Plumbing Burnham Indirect Water Heaters | Al50Sl Alliance Hydrastone-Lined Indirect Water Heater

The Concept Of Stone-Lined Water Tanks Is Not A New One, And Has Been Proving Successful Against Corrosion For Ages. Many Of The Stone-Lined Tanks Are Installed Are 25-30 Years Old. In Fact, The New England Area Has Been Using Stone-Lined Tanks For Years Due To Their Water Supply Being Very Acidic And Has Been Devastating To Glass Lined Tanks.
What Makes The Alliance Sl Unique Is The Hydrastone-Lining. This One Half Inch Lining Protects The Steel Tank From The Corrosive Action Of Water. When The Water First Enters The Tank, It Is Absorbed Into The Hydrastone-Lining Permanently. This Water Loses Its Oxygen And Becomes Inert, Non-Corrosive Water Which Then Acts As A Protective Wall Between The Hot Water And Steel Tank. This Unique Process And Design Makes Alliance Sl Water Heaters A Great Choice For Domestic Hot Water Applications.

• Maximum First Hour Rating At 135°F (Gal./Hr.) : 225
  
• Continuous Draw Rating At 135°F (Gal./Hr.) : 171
  
• Standby Loss (°F/Hr.) : .56
  
• Minimum Boiler Output (Mbtu/Hr.) : 110
  
• Boiler Water Flow Rate (Gal./Min.) : 6
  
• Pressure Drop Through Coil (Ft. W.C.) : 9.5
  
• Storage Capacity (Gal.) : 50
  
• Height (In.) : 40-3/4
  
• Diameter (In) : 26
  
• Maximum Allowable Working Pressure : 150 Psi
  
• Approximate Shipping Weight (Lbs.) : 248
  
• A 10-Year Full Tank Replacement, Two-Year Labor And One Year On Parts, Which Include The Coil, Come With Every Alliance Sl.
• Hydrastone-Lining