Thermostats Braeburn | 1230 Non Programmable Thermostat (2 Heat/1 Cool) – Economy Series

Product Overview
The Non-Programmable Thermostat Shall Be A Braeburn Model Number 1230, 4.25″ High X 5.12″ Wide X 1″ Deep, Powered With Either 24 Volt Ac Or With Two “Aa” Alkalinebatteries (3.0 Volt Dc). In The Event Of A Power Failure, The Unit Shall Retain All User, Installer Settings And Setpoints. The Thermostat Shall Be Compatible With Low Voltagesingle Or Multi-Stage Gas, Oil, Or Electric Heating Or Cooling Systems, And Single Stage Heat Pumps With Or Without Auxiliary Heat. Also Compatible With 250Mv – 750Mvmillivolt Heating Only Systems And 2 Wire Hydronic Zone Systems. The Thermostat Shall Have A Bright Blue Backlight Display And Separate Sub-Base. Temperature Controlrange Shall Be Between 45° And 90° F (7° And 32° C), Accuracy Of +/- 1° F (+/- .5° C) And Operating Humidity Range Between 5% And 95% Relative Humidity. The Thermostatshall Include Separate Installer And User Setup Modes, Heat Pump Check Terminal, Permanent Non-Volatile Memory To Retain User Settings, Filter Check Monitor Andinstaller Lock Mode.

Product Features

• Non-Programmable
• Large 4.4 Sq. In. Display
• Bright Blue Backlight
• Smartlimit Temperature Limits
• Hardwire Or Battery Powered
• Installer Lock Mode
• Filter Check Monitor
• Optional Celsius Display
• Separate O And B Terminals
• Adjustable Temperature Differential
• Heat Pump Check Terminal
• Compatible With 2-Wire Hydroniczone Systems